Example scans

You can view our screener’s homepage to search & view scans created by other users.

Simple scans

  1. RSI Overbought
  2. RSI Oversold
  3. RSI Overbought OR Oversold
  4. Williams %R Overbought OR Oversold scan
  5. Gapup / Gapdown 
  6. 52-week high/low
  7. Bullish MACD Signal Cross
  8. Bearish MACD Signal Cross
  9. Bearish “Death Cross” scan
  10. Bullish “Golden Cross” scan
  11. Price crossing above to Pivot R1
  12. Price crossing below to Pivot S1
  13. Stocks in uptrend
  14. Stock in downtrend

Advanced scans

  1. Stocks rising with an increase in volume
  2. Stocks falling with an increase in volume
  3. Stocks with rising/falling prices and increase in volume(above 2 combined into a single scan)
  4. RSI DIvergence (price falling rsi rising)
  5. RSI crossing above 20SMA RSI on daily
  6. CMO 10 Chande Momentum Oscillator (10) above 50

Candlestick pattern scans

  1. Doji Patterns scan
  2. Hammer pattern on the daily candle
  3. Inverted hammer
  4. Shooting star
  5. bearish engulfing near resistance
  6. bullish engulfing near support
  7. Bullish flag formation on a daily
  8. Bearish flag formation on a daily

Special scans & dashboards

  1. avoid ETFs from scan
  2. Alert only between 11 am to 14:30 pm
    Dashboards –
  3. Volume in premarket
  4. Top gainers % Top loosers
  5. Advance decline for the Nifty 500 and nifty 200
  6. Positive and negetive volume indices

277 thoughts on “Example scans”

  1. Can you please help to apply filter for William %r where the william %R values cross above 20/30/40
    I tried but its not giving any results at the end.

    Thanks in advance for such a wonderful feature to be added into this site.

    Reply

    1. Sure, i’ll be adding a video for that shortly. In the meantime, ensure the values you enter to compare are negative, -20/-30/-40 as Williams %R ranges from 0 to -100

      Reply

      4. Dear sir ,
        Pl give me coding
        1. 50 MA rising touch to candle
        2. Lower bollinger band aslo tough to candle .
        3. Both touch to candle

        Reply

          1. Good morning sir madam
            I searched for bil and found that chart shoud show 50 sma rising instead of that it shows 10 and 20 sma why

        1. Hello,

          You may view tutorials on scans and alerts here:
          https://chartink.com/articles/scanner/scanner-user-guide/

          To set alerts for a scan, you need to click on “create alert” after opening the scan page and set your alert preferences accordingly.
          https://chartink.com/articles/alerts/alerts-guide/
          https://chartink.com/articles/alerts/desktop-mobile-a-k-a-web-notifications/
          https://chartink.com/articles/alerts/webhook-support-for-alerts/

          You can also start by reviewing our top scans here: https://chartink.com/screeners/top-loved-screeners

          They contain the top 10 scans used for Intraday/Swing & short term trading

          If you need help in creating a scan, please share your requirements, we shall create the same for you.

          Reply

    2. Can you provide scan filters for point & figure chart i.e. when x becomes o and when o becomes x with points and percentage for each box as in stockcharts.com? Kindly reply.

      Regards
      Ramakrishna

      Reply

        1. Hello sir,

          I am looking for scanner which give sudden rise in volume buying in last 15 minute closing the market and can result gap up opening as BTST.

          Reply

    3. Can you please let me know how to run scan for 5 day 15 minutes chart where simple moving average for 10 days and 3o day exponentially moving average cross each other.

      Reply

      1. Sure, below is the scan:
        https://chartink.com/screener/sma-10-crosses-above-sma-30

        As a premium member you would be able to:
        Access realtime data for Charts & Scans every minute
        Create Alerts and receive updates of stock breakouts over sms/email/mobile/desktop
        View charts in 1/2/3 minute timeframes with auto-refresh
        Run screeners in 1/2/3 minute timeframes with auto-refresh
        Scan any watchlist via the segment dropdown of a scan
        Get Dedicated support for your scanner requirements

        You can get details/signup our premium service here: https://chartink.com/subscription

        Reply

      2. Dear Sir,
        Thank you very much for your prompt reply.

        I have created watch list and would like to copy your scan but unable to do that. can you
        please guide me, how to copy and save your scan in my watch list.

        Reply

          1. Sir chart link mai open low same with volume breakout aaise search karata hu par Subah mai o proper run nahi karata kay primium lunga to koi diktat aai

          2. क्षमा करें, लेकिन मुझे डर है कि आपका संदेश पूरी तरह स्पष्ट नहीं है। क्या आप कृपया इस बारे में अधिक विवरण प्रदान कर सकते हैं कि आप क्या संदर्भित कर रहे हैं?

  2. HIGH I WANT A SCANNER WHERE IN IF A STOCK CROSSES AND CLOSE ABOVE 5EMA HIGH OR CROSSES AND CLOSE BELOW 5 EMA LOW . CAN WE DO IT ON CHART INK

    Reply
  4. Pingback: Scanner User Guide – Chartink Articles

  14. Hi,
    Can you please introduce scanner for weekly charts as well? We are all waiting for this.

    Regards,
    Rangaswamy

    Reply

  20. Hi,

    Can you MACD Histogram ascending/descending OR RSI ascending/descending etc.

    I meen ascending/descending parameter should be there.

    Reply

  21. Hi, I understand that we can scan only daily data.

    1. Does the scan take place on EOD data or on live daily data?
    2. Is there any plan to add intra-day data to the scanner?
    3. Are we going to get the full stack of indicators in the scanner drop down in the near future. If yes, what is the ETA?

    Reply

  23. KINDLY GIVE OPTION TO SELECT DAY, MONTH, YEAR FOR SCRIP TO FIND RSI,
    for example if I need Rsi below 30 in Monthly chart, is there any provision for that

    Reply

  26. Please add weekly as well as monthly

    and if possible do for live day scanner (means our yellow background candle )

    Reply

  27. hi akash…it’s wonderful job you did….thanks …

    how can search morning star patter by using our scanner…please tell me

    Reply

  29. Hi… Great work… Please add scanning on weekly and monthly time frame also…. Eg weekly/monthly macd breakouts… Weekly/monthly EMA crossovers etc.
    Thanks in advance

    Reply

  32. Hi .. just noticed one thing .. that daily charts are missing data for some days in between. Is it for some purpose ?

    Reply

  34. Hi – Looks you have put a lot of efforts in making these indicators.. Absolutely remarkable.. hats off sir.

    Reply

  35. How to create a scan that finds a cross over (above) of 260 EMA[daily or weekly] to 1300 EMA[daily or weekly] in the last 6 months ?

    I have tried creating the scans but cannot put the “in last n months” condition anywhere?

    Reply

    1. The screeners currently run only as of a given date(latest/1 day ago), we’ll soon be adding the ability to backtest your screening strategies that shall allow you search/filter breakouts in the past 6 months

      Reply

      1. It has been more than 1 year now. Are you still working on backtesting feature? That is what is stopping me from getting paid membership.

        Reply

    1. We currently have only daily,weekly & monthly ranges. We’ll soon be adding Intraday (1M, 2M.. etc) ranges

      Reply

  39. Dear,

    In super trend there is an option for Buy opportunity signal shown, but today it was not shown, kindly help to know about the option or upload all the supertrend related scanner.

    Reply

      1. my second formula i can add stock trading above 5 day sma and 5 day sma above 20 day and volume average between 2 and 20 trading days stock coiled near 5 ,10, 20 day sma

        also first formula i can add 4 % maximum breakout
        but ROC i cant add ,
        if it is necessary you can modify but should keep remain my formula

        Reply

  41. Hi Akash,
    This site is the best screener in India. And now it has intraday which is
    excellent.
    You guys are doing a great job.

    Do you have any plans to add fundamentals screens too ?…

    Reply

  42. Hi, Need a facility to add/delete new columns in the scan list apart from the default ones.is that possible.eg : i want to see cci as well besides the stock names in scan list

    Reply

  44. Sir
    Close crossed above one hour super trend (7,3)
    This is not working properly result of this filter is not correct

    Reply

  45. Hi Akash,

    1. For 15 minute candle, MACD and ADX(14) is not calculating correctly for some stocks.

    Example: Today 06-Oct-2017, for stock NAGREEKEXP. MACD signal

    Example: Today 06-Oct-2017, for stock NELCAST.

    [0] 15 minuteADX DI Negative(14)Greater than equal to[0] 15 minuteADX(14) failed, actually it is ADX(14) > ADX DI Negative

    2. Is it possible to add ROC (Rate of change 5,9) ?

    Thanks,
    Venkat

    Reply

    1. Adding further comment on MACD as it was not published in earlier comment:

      Example: Today 06-Oct-2017, for stock NAGREEKEXP.
      [0] 15 minuteMacd Line(26,12,9)Greater than equal to[0] 15 minuteMacd Signal(26,12,9) failed.

      In fact MACD is less than Signal for this stock. Please check and fix it.

      Reply

        1. The low from 11:30-11:44 (15 minutes candles), is 70 is from the NSE data, we get the Feed directly from them. Also, there’s a lag of 15 minutes on our charts & scanner for the data, I’m unsure if you’ve considered that as well here.

          Reply

  49. i want a stock which increase more then 1 % but not more then 3% of previous close. how to program it? please advice.

    Reply

      1. Hi Akash ji

        Ok. Thanks for the update!

        My observation is that the colours of the Moving Average and the Moving avg 1 line is almost same. It would be great if you change the colour of one of them. I hope that can be done without too much coding efforts.

        Reply

  53. Hi Akash,
    Great work !!!
    Great thank you very much for this amazing site.

    Can you please help with the commodity as well?

    Reply

  55. looking for a chart ink for the below listed items

    scrips which are around their 52W high (Within 0-20% of their last 52W high)
    PB should be < 2 or around 2
    PE shoud be lower than industry pe (Ideally < 50% of industry PE)
    Last one year (4Qtr) average SQG should be around 20% or more
    Is there a filter by sector
    PricePerformance 10+% and DayVolumeVs2WeekAvgVolume
    Turn over

    Reply

  56. Akash Sir,
    I want to scan for the stocks, whose SMA are in the tight range and nearer to each other.
    10 SMA, 20 SMA and 50 SMA.
    Can you help to get such scanner ?

    Reply

  58. Greetings! Kindly clarify… If I am watching a stock and want to add it to my watchlist… do I need to enter it manually again? Also is there a provision where I can scroll down on watchlist and view the latest updated charts automatically rather than again click individually?

    Reply

  64. sir i want to create a filter which is find the stock bitween range of 97-100, 197-200,297-300 & 397-400, can this is possible. please guide.

    Reply

  67. Sir,
    Is the below scan possible? If yes, How?
    1) Today’s candle bullish
    2) today’s close greater than open of last bearish candle (may or may not be the previous candle)

    Similarly for weekly and monthly candles

    Reply

    1. Currently we do not provide with buy/ sell signals. We provide with scans and alerts. Please share your scan requirement and if possible, we shall confirm the same. You will get instant alerts whenever a stock matches your criteria.

      Reply

  69. Hi,

    I want to scan and create alert for the Indexes (Nifty & BankNifty), when SMA above/below 20/30 and WMA above/below 50

    Can you help to get such scanner ?

    Reply

  70. Hi,

    I want to scan and create alert for the Stocks whose Williams %R(14) and Chande MTM (9)

    Can you help to get such scanner ?

    Reply

  71. Dear Sir,

    Can we scan the list of stock where 13EMA is just crossing above 34 EMA or about to cross. If so please give tme the steps to do the same.

    Reply

  72. i want to use readymade screener of bullish tommorow scanner for f&o stocks to do intra day trade or btst trade pl guide

    Reply

  73. Hello Team,
    I have attended Adam Khoo online course on swing trading.But he has used thinkorswim charting software to screen the stock using below script. Is it possible to simulate the same in ChartInk.If so it would be helpful for daily screening for stocks for my swing trading.
    Thanks

    18 Bounce Long ::

    MovAvgExponential(“length” = 18) is greater than MovAvgExponential(“length” = 50) and MovAvgExponential(“length” = 50) is greater than MovAvgExponential(“length” = 100) and MovAvgExponential(“length” = 100) is greater than MovAvgExponential(“length” = 200) and low from 1 bars ago crosses below MovAvgExponential(“length” = 18) and MACDHistogramCrossover(“fast length” = 18, “slow length” = 50, “crossing type” = “Negative to Positive”) is true within 15 bars and MACDHistogramCrossover(“fast length” = 50, “slow length” = 100, “crossing type” = “Negative to Positive”) is true within 15 bars and StochasticFull(“over bought” = 70, “over sold” = 30, “k period” = 5, “d period” = 3, “average type” = “EXPONENTIAL”).”FullK” is less than or equal to 30 within 3 bars and open from 1 bars ago is greater than MovAvgExponential(“length” = 18) and close from 1 bars ago is greater than MovAvgExponential(“length” = 18) and close is greater than high from 1 bars ago and close is greater than open

    Reply

  78. Dear Admin,

    How to add time stamp for a scanner when it get triggered.

    Please let me know in details.

    Thank you in advance.

    Reply

    1. As a premium member you would be able to:
      Access realtime data for Charts & Scans every minute
      Create Alerts and receive updates of stock breakouts over sms/email/mobile/desktop/webhooks
      View charts in 1/2/3 minute timeframes with auto-refresh
      Run screeners in 1/2/3 minute timeframes with auto-refresh
      Scan any watchlist via the segment dropdown of a scan
      Customized Atlas dashboards for market overview
      Get Dedicated support for your scanner requirements

      You can get details/signup our premium service here: https://chartink.com/subscription

      Reply

  80. Hi please guide me to create a scanner , first 5 min candle volume should be greater than previous 3 days 5 min candles

    Reply

  83. hi i want scanner for following condition,

    scan 1-
    last traded price crosses above 200 ema on 5 min timeframe

    scan 2-
    last traded price crosses below 200 ema on 5 min timeframe

    Reply

  84. can you please answer this two queries:

    Latest Close crossed_above Latest Ema ( close,200 )
    on which time frame above scan will run

    difference between below scans:
    [0] 5 minute Close crossed_above Latest Ema ( close,200 )

    [0] 5 minute Close crossed_above [0] 5 minute Ema ( close,200 )

    Latest Close crossed_above [0] 5 minute Ema ( close,200 )

    thank you.

    Reply

    1. The below will run on 5 min candles:
      [0] 5 minute Close crossed_above [0] 5 minute Ema ( close,200 )

      The below would run on daily candles:
      Latest Close crossed_above Latest Ema ( close,200 )

      Other 2 seem logically incorrect.

      Reply

  85. sir, i want Heiken Ashi inside bar scan in 15min time frame.I will be thankful if there is any scanner for this

    Reply

    1. If today’s close greater than yesterday’s close then the volume candle will be green and if today’s close less than yesterday’s close then the volume candle will be red.

      Reply

  90. 1 hour candle close near its low
    +
    volume is high than last 2, 1 hour candle

    can anyone help me out with this scan

    Reply

  91. Dear sir

    Hope you are doing well……

    I found this one is a excellent website for manual scanner. You can literally scan everything you want to.
    I have one query with it and I hope you can solve it. so, Could you please suggest me the scanner input for **/stocks with highest pre market volume with open = high/low in 5 min time frame/**

    Thank you for your valuable help in this concern…………

    Reply

    1. Sure, we can create an Atlas dashboard for the same. Pre-market data is updated at 9.09am for premium members and 9.14am for few members. Let me know if you need help in creating one.

      Reply

  92. HI CHARTINK
    How to put the HIGHEST HIGH of last 5 candle & LOWEST LOW of last 5 min candle.
    can someone guide please

    Reply

  93. Hello Team,

    Request you to please help me out with the below screener. I tried but the outcome was not right.

    CMP should be less than 15% of 200 SMA Price* (200 SMA Price/values should be of weekly chart).

    Reply

  94. Hi Plz share the formula
    1 day ago Low Less than 1 day ago >> LA
    Larest Low Greater than Latest >> LA

    Reply

  96. am big fan of chartink. But I am not use it perfectly.
    Please help me creating my scanner
    [=1]15min (15min first candle) high break by any candle but breakout is failed my entry is on second attempt when latest candle close above day first 15min candle high and less than latest day candle high.

    Reply

  98. I need to develop the indicator of say 7 ema on the field RSI say 14 with clour selection of choice and Y-Axis Right shift, and it should give the alerts of top position and bottom position of this indicator on stocks. Is that possible to get on this platform.

    Reply

  100. Hello sir,
    Can I get a scanner
    1)when the stock or index breaks H4 and L4 layers (camarilla equation),
    2)Separate scanner when it breaks h3 ad l3 layers (camarilla equation).
    3)when the stock or index opens (i.e. first candle )gap up or gap down beyond DC 3 range i.e. above H3 OR below L3 (camarilla equation).
    Thankyou for the same.

    Reply

  103. Dear sir,
    Plz give me another code
    15 minutes time frame
    1)RSI 60 up
    2)50MA rising touch to candle

    Reply

  106. Sir,

    Can I get a scanner for three weekly inside bars one day ago and latest close is crossing above of yesterday’s high..

    Thanks for the same in advance.

    Reply

    1. Hello,

      Sorry, but we do not provide any recommendations/suggestions here. We only provide a platform where you can create scans/dashboards based on your strategy and accordingly filter out stocks that meet all the criteria.

      Reply

  114. Hello Sir,

    How Do is Set below Scanner.
    FOR EMA
    – Previous Candle Low touch EMA line
    – latest candle low above EMA line

    Reply

  117. Dear Sir,

    Can you please help me to build the below scanner criteria (Time Frame: 15 Minutes)

    MovAvgExponential(“length” = 18) is greater than MovAvgExponential(“length” = 50) and MovAvgExponential(“length” = 50) is greater than MovAvgExponential(“length” = 100) and MovAvgExponential(“length” = 100) is greater than MovAvgExponential(“length” = 200) and low from 1 bars ago crosses below MovAvgExponential(“length” = 18) and MACDHistogramCrossover(“fast length” = 18, “slow length” = 50, “crossing type” = “Negative to Positive”) is true within 15 bars and MACDHistogramCrossover(“fast length” = 50, “slow length” = 100, “crossing type” = “Negative to Positive”) is true within 15 bars and StochasticFull(“over bought” = 70, “over sold” = 30, “k period” = 5, “d period” = 3, “average type” = “EXPONENTIAL”).”FullK” is less than or equal to 30 within 3 bars and open from 1 bars ago is greater than MovAvgExponential(“length” = 18) and close from 1 bars ago is greater than MovAvgExponential(“length” = 18) and close is greater than high from 1 bars ago and close is greater than open

    Reply

  118. Hi Sir,

    I would like to build the scanner with Guppy Multiple Moving Average Crossover + breaks upper bollinger band/Cross-below + breaks lower bollinger band for 15 Minutes time frame.

    Reply

  121. Sir Need a Scanner – Day Chart 8ema/34ema cross over 200 ema (golden cross ) then doing retest.
    then opposite – Day chart 8ema/34ema cross down ( death cross ) then doing retest.

    Reply

  122. Sir,
    Need 2 screener
    BUY : STOCK AT WEEKLY RESISTANCE ( SPAN 6 MONTHS ) WITH RSI GREATER THAN 70
    SELL: STOCK AT WEEKLY SUPPORT (SPAN 6 MONTHS) WITH RSI LESS THAN 30
    THANK YOU

    Reply

  123. hi
    need a scan of gap down opening in time frame of
    15 min and 2 hr candle within 100 days

    second i would like to point out that your scan data changes in the same scan over 1-2 days, so it is never the real time data.

    thanks

    Reply

    1. Hello,

      Your scan requirement is not very clear. Could you please elaborate more and share a sample chart image for reference to create a scan for you. You can share your details here: [email protected]

      Also, please note that free version data is delayed by 5 minutes. In a premium subscription, charts and scans are updated every minute. Our premium members get realtime data with updates every minute for our Charts & Scans. So if you run a scan at 9:20 am, for example, it would be based on the latest data until 9:19:59am and so on…

      Reply

    1. Hello Deepak,

      Please note we do not provide any recommendations for scans or stocks here. We only provide a platform where traders can create scans and dashboards based on their strategy and filter out stocks that meet specific criteria.

      We provide dedicated scanner support only to our “premium members,” allowing you to send your scan requirements and create and share the scan with you.

      You review example scans or create your own scan by following our scanner guide here. Please note, Entry and Exit are totally up to you and your careful observations.

      You can start by reviewing our top scans here: https://chartink.com/screeners/top-loved-screeners

      They contain the top 10 scans for Intraday/Swing & short-term trading. These are sorted by “most loved” by our members.

      Reply

  125. Dear Sir
    How to scan for stocks whose relative strength w.r.t. Nifty index is crossing above the 0 line ?
    Thanks

    Reply

    1. Hello,

      We understand your concern and appreciate you bringing this to our attention. Currently, we do not have a Relative strength feature, and we are in the process of exploring the possibility of adding this feature & new indicators soon. We appreciate your patience as we improve and enhance our service for our users.

      Reply

  126. Could someone please help me have this scanner created? I have trouble with volume and the scanner is not properly showing results.

    Criteria

    I need 3 days continuosly falling stocks.

    Each day candle size decreasing but each day volume increasing.

    Thank you.

    Reply

  128. Dear team gm
    Really this is very useful for scanner thanks

    my question how can i set a time for scan .example i need only after 9.30 pls advice
    alok grover

    Reply

  130. Sir i am watching 15min breakout stocks scanner.

    how to set alert to trade in the stocks.
    when i see the list of stocks , it is already in increased condition.

    Kindly reply for benefit of myself.
    is there any video for taking trade using with charti nk screener..

    Reply

    1. Hello,

      Please share the following details to this email id: [email protected]
      URL of the scan that you are referring to?
      Share a few example stocks with us for which you should have received alerts but did not get alerts for the same.
      Share a screenshot of the alert settings for your scan. You can do so by opening your scan, clicking on the “modify alert” option, and sharing a screenshot for the same here for our reference.
      Note: The scan will only send the alerts if all the scan conditions are met by the stock at the same time.

      Reply

    1. Hello,

      We do not provide any guides related to trades nor we provide any recommendations for scans or stocks here. We only provide a platform where traders can create scans and dashboards based on their strategy and filter out stocks that meet specific criteria.

      If you have any strategy, we can create the scan based on the same. Please share more details about the same on this email ID: [email protected]

      Reply

  134. Hi,
    Can I create a scanner to identify any stock whose RSI went below 20 during any of the last 60 candles of 15 minutes timeframe.

    Thanks

    Reply

  135. Hello,
    Can you please give the link or add Guppy moving average indicator for stock screening.
    Thank in advance.

    Reply

  136. hello sir , can you make sccaner which includes below indicator with criteria:
    1- MACD: monthly/ weekly/ daily- shows uptick or upward
    2- RSI: monthly/weekly/daily- above 60
    3- BOLLINGER BAND: monthly/weekly/ daily- price should be in upper band or chalanging upper band

    Reply

  138. I need a function which will calculate the the sum of volume from the first candle of the day till the latest candle, on a day to day basis for 1 minute interval. I know that the daily chart will provide the sum from first candle to the latest candle but it doesn’t satisfy the condition. Hope you can help me.

    Reply

    1. Hello,

      This won’t be possible, since we have to update the sum function every minute to include the latest candle volume. But the daily candle volume will give you the same results.

      Reply

    1. Hello,

      This can be done with the help of a custom indicator/formula. Here is an example scan for your reference:

      https://chartink.com/screener/narrow-cpr-for-the-next-month-and-week

      Note: Please ignore the names of the indicator. They will show you the next week CPR within 1% and next month within 3% range. 

      To use this custom indicator, you can “Copy scan” scan & make changes. You can view the logic of the custom indicator by clicking on the purple sign(>>) next to the indicator.

      Also, you can create your own custom indicator by copying/pasting the logic from the indicator shared here https://chartink.com/indicator

      Once you create your custom indicator, it should be visible in the dropdown list under “derived/custom indicators”. Here is a short video on how this can be done.: https://drive.google.com/file/d/1bnr1ahmajyXIpBRE69ese60sm7541-14/view?usp=sharing

      Reply

Leave a Reply

Your email address will not be published.